Comment faire une mise à jour logiciel pour Nokta Simplex

Comment faire une mise à jour logiciel pour Nokta Simplex

Publié le : - Catégories : ASTUCES ET CONSEILS , LA DÉTECTION

Mise à jour logicielle


Systèmes d'exploitation : Windows XP (avec SP3), Vista, Windows 7, 8 ou 10.

* Si vous rencontrez des problèmes lors de l'ouverture du fichier d'installation, veuillez désactiver tous les programmes antivirus sur votre PC.

The latest update includes all previous updates.

Software Update (2020.06.02) : System Software V2.78

Download : System Software V2.78

Updates Made :


ID stability and depths have been changed back to the same levels of version 2.68. This will NOT affect the overall depth and sensitivity of the device.

Software Update (2020.04.21) : System Software V2.77

Download : System Software V2.77

Updates Made :

1. Mute Function has been added
Press the Pinpoint Button once to mute your detector without going into settings. This will help eliminate the interference noise from pinpointers that operate at the same frequency.

2. Audio levels for wired headphones
2 sets of audio levels have been added when the device is used with wired headphones. Choose between Low (L1-L4) or High (H1-H4).

Software Update (2020.04.17) : System Software V2.76

Download : System Software V2.76

Updates Made :

1. Sensitivity Level 7 has been added to provide extra depth
Please keep in mind that the device may run noisier at this level depending on conditions and that this is totally normal.

2. An extra mode has been added - Park 1
The Park mode on the previous versions has been named as Park 2 on this update and a new Park 1 mode has been added.
Park 1 is relatively deeper but a bit slower than Park 2 mode.
In this mode, the device produces a low tone for ferrous targets with 0-15 IDs, a medium tone for gold and non-ferrous metals with IDs 16-69 and a high tone for non-ferrous metals with IDs 70-99 such as silver, brass and copper.

3. Changes have been made for the All Metal Mode
* It has been removed from the first spot in the options and moved to the end.
* Threshold setting has been added to this mode.
In the All Metal mode, the threshold setting for each sensitivity level is optimized to provide the best performance on different terrains.
You can adjust the threshold setting between -50 +50 based on ground conditions.

4. Mineralization bar has been added to the screen

5. Timeout lengths have been increased

6. BACK function (up arrow) has been added to exit from settings to go back to the main screen without waiting for the timeout

7. ID depth has been increased

8. 4 levels have been added to Automatic Brightness shown as A1-A2-A3-A4 on screen

9.Audio for the pinpoint mode and wired headphones has been optimized

10. Manual Ground Balance function has been expanded
If the device receives a lot of noise and/or emits false signals and you cannot eliminate it by reducing the sensitivity, first set your sensitivity back to its original level. Then increase the ground balance value between 90.1 - 91.0 one by one until the noise is eliminated. As the ground balance value is increased, the device's sensitivity to high conductive (silver, copper etc.) coins will decrease.


Partager ce contenu

Ajouter un commentaire

 (avec http://)